Exotic Marble
Verde Aver
Marble · Italy
Verde Aver is a marble quarried in Italy, known for its veining and movement. Well suited to floors, feature walls and vanities. See the actual slabs at the Flora Marble gallery in Mumbai.
Specification
- Type
- Marble
- Tone
- Green
- Finish
- Polished
- Origin
- Italy
- Thickness
- Typically 18–20 mm; other thicknesses on request
- Formats
- Full slabs · cut-to-size · book-matched pairs
- Availability
- Stocked slabs in the Mumbai gallery, or sourced to order from the quarry — enquire for lead time
Made to order. Imagery is indicative — no two slabs of natural stone are alike, and we send photographs of the actual lot before anything is confirmed. Enquire for current availability, slab sizes and finishes; our team replies personally.
Where it works
Verde Aver, room by room
- Floors
- Polished for a formal living room or a lobby; honed where there is grit underfoot or a doorway open to the monsoon.
- Walls and cladding
- Run as large calm panels behind a bed, a reception desk or along a corridor.
- Bathrooms
- Vanity tops, shower walls and floors, sealed and wiped dry where water stands.
- Staircases
- Treads and risers cut to size, with the vein running the same way on every step.
- Kitchens
- Counters and splashbacks for a cook who wipes lemon and wine as they go; a honed finish hides the etching a dropped lime leaves on a high polish.
- Showpieces
- The pooja room, a dining table top, a fireplace surround.
Finishes and formats
Verde Aver is supplied polished as standard, honed or leathered on request, as full slabs, cut-to-size, book-matched pairs, typically 18–20 mm; other thicknesses on request. Polished, honed or leathered →
Care
Verde Aver is a calcium stone: seal it after installation and again every year or two, clean it with a pH-neutral stone soap, and wipe up lemon, vinegar and wine rather than leaving them to etch the polish. A honed finish shows etching least. How to care for natural stone →
Where to see it
Verde Aver in Mumbai, made in Silvassa
The gallery · Mumbai
Main Marble Market, Vile Parle East
Stocked slabs stand in the gallery to be seen in person; catalogue stones are sourced to order and shown before you commit. Open Mon–Sat, 10 AM – 7 PM.
Plan a gallery visit →The factory · Silvassa
Silvassa–Bhilad Road, Athal
Imported blocks are cut, resin-treated and polished into slabs and cut-to-size pieces at our own plant at Athal, as they have been since 2002. Open daily, 8 AM – 8 PM.
About the factory →Delivered to every state
Verde Aver across India
Slabs of Verde Aver are cut and polished at Athal, Silvassa and leave by road for every state in India; the Mumbai gallery, 5 km from the airport, is where to see them first if you are flying in. Pick your city for the road distance to each place, which is nearer, and how an order usually runs from there.
West India
North India
South India
- KarnatakaBengaluru · Mysuru · Mangaluru
- TelanganaHyderabad
- Andhra PradeshVisakhapatnam · Vijayawada
- Tamil NaduChennai · Coimbatore · Madurai
- KeralaKochi · Thiruvananthapuram · Kozhikode
- Puducherry
East India
- West BengalKolkata · Siliguri
- OdishaBhubaneswar
- BiharPatna
- JharkhandRanchi · Jamshedpur
Questions about Verde Aver
What is Verde Aver?
Verde Aver is marble from Italy, with a green tone. It is a crystalline limestone, which is why it takes a mirror polish and why acids etch it. Flora Marble imports it as blocks and slabs and cuts and finishes it at its own factory at Athal, Silvassa.
Can Verde Aver be used on a kitchen counter?
Yes, with the care marble asks for: wipe lemon, vinegar and wine as you go and keep it sealed; a honed finish hides the etching a dropped lime leaves on a high polish. Many of our clients put Verde Aver on the island and a harder stone on the working run.
What finishes and sizes does Verde Aver come in?
Verde Aver is supplied polished as standard, honed or leathered on request, as full slabs, cut-to-size, book-matched pairs, typically 18–20 mm; other thicknesses on request. Slab sizes vary lot to lot, so we send the measurements and photographs of the actual slabs before anything is confirmed.
Where can I see Verde Aver slabs?
Stocked slabs stand to be seen at the Flora Marble gallery in Vile Parle East, Mumbai, a few minutes from the airport (open mon–sat, 10 am – 7 pm); a catalogue stone is sourced to order and shown to you before you commit. Every slab is cut and polished at our own factory at Athal, Silvassa, where buyers are welcome.
Does Flora Marble deliver Verde Aver to Hyderabad?
Yes. Verde Aver leaves the Silvassa factory by road for every state in India, Hyderabad, Chennai and Kolkata included, crated and strapped for the journey. Each city has its own page with the road distance from the factory and the Mumbai gallery and how an order from there usually runs.
How is Verde Aver priced?
Per project, slab by slab: the slabs selected, their sizes, the finish and the cutting all move the figure, so there is no list price online. Send the drawings or the areas and the finish you have in mind and Flora Marble will quote the Verde Aver it would select for you, with photographs of those slabs.
